April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

CHOOSE METHOD

There are two initialization methods.

Which method do you use?

With door Switch

GO TO STEP 2 .

With vehicle speed

GO TO STEP 3 .

WITH DOOR SWITCH
1. Turn Ignition Switch from ACC to OFF position.
2. Driver door Switch is ON (open) → OFF (close) → ON (open).
GO TO STEP 4 .

WITH VEHICLE SPEED

Drive the vehicle at more than 25 km/h (16 MPH).

GO TO STEP 4 .

STEP-4 (SLIDE THE SEAT TO THE FRONT EDGE BY POWER WALK-IN FUNCTION)

Active power walk-in function and let the seat be slid to the front edge.
NOTE:
- STEP-4 is the initialization procedure for power walk-in function.
- If the seat position is already at the front edge, slide the seat backward once and then active power walk-in function.
END