How To Set
With CONSULT
Perform the "CLEAN SW SET" of HVAC work support item.
| Work Support Items |
Display |
Setting |
| CLEAN SW SET |
MODE1 |
- When the auto intake switch is ON, the A/C Switch is also turned ON in synchronization with the auto intake switch.
- Control of the auto intake switch is functional even when the A/C Switch is turned OFF.
|
| MODE2 |
- When the auto intake switch is ON, the A/C Switch is not turned ON in synchronization with the auto intake switch.
- Control of the auto intake switch is functional even when the A/C Switch is turned OFF.
|
| MODE3* |
- When the auto intake switch is ON, the A/C Switch is also turned ON in synchronization with the auto intake switch.
- When the A/C Switch is turned OFF, the auto intake switch is turned OFF in synchronization with the A/C Switch.
|
| MODE4 |
- Auto intake switch can be turned ON only when A/C Switch is ON.
- When the A/C Switch is turned OFF, the auto intake switch is turned OFF in synchronization with the A/C Switch.
|
* : Initial status
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.