Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Item [Unit] |
Description | |
|---|---|---|
| IGN VOLT | [V] | Displays the ignition power supply voltage. |
| CONTROL MODULE MALF | [Off / On] | Displays the chassis control module malfunction. |
| CAN DIAG STATUS | [Off / On] | Displays the CAN network diagnosis status. |
| STP LAMP OFF RELAY 1 | [Off / On] | Displayed but not used. |
| STP LAMP OFF RELAY 2 | [Off / On] | Displayed but not used. |
| ESS RELAY | [Off / On] | Displayed but not used. |
| VEHICLE SPEED | [km/m] | Displays the vehicle speed. |
| FR WHEEL SPEED | [RPM] | Displays the rotational speed of front RH tire. |
| FL WHEEL SPEED | [RPM] | Displays the rotational speed of front LH tire. |
| RR WHEEL SPEED | [RPM] | Displays the rotational speed of rear RH tire. |
| RL WHEEL SPEED | [RPM] | Displays the rotational speed of rear LH tire. |
| STEERING ANG SENSOR | [deg] | Displays the steering angle from the steering angle sensor. |
| DECEL G SENSOR | [G] | Displays the decel G. |
| SIDE G SENSOR | [G] | Displays the side G. |
| YAW RATE SENSOR | [deg/s] | Displays the yaw rate. |
| ACCELE PEDAL POSITION | [%] | Displays the accelerator pedal position. |
| THROTTLE CONTROL | [NORMAL / INCORR / PREV / INPOSSI] | Displays the electric throttle status. |
| SHIFT POSITION | [Off / P / R / N / D (A) / S / L / B / 1- 6 / M 1 -M 8 / A 1 - A 6] | Displays the shift position. |
| BRAKE SWITCH 2 | [Off / On] | Displays the brake pedal operating status. |
| BRAKE SWITCH 1 | [Off / On] | Displays the brake pedal operating status. |
| STOP LAMP SW | [ACT / INACT] | Displays the stop lamp switch status. |
| PRESS SENSOR | [bar] | Displays the brake fluid pressure. |
| ABS | [NORMAL / ABNOR] | Displays the ABS function status. |
| ABS MALF | [Off / On] | Displays the ABS function status. |
| EBD | [NORMAL / ABNOR] | Displays the EBD function status. |
| TCS | [NORMAL / ABNOR] | Displays the TCS function status. |
| TCS MALF | [Off / On] | Displays the TCS function status. |
| VDC | [NORMAL / ABNOR] | Displays the VDC function status. |
| VDC MALF | [Off / On] | Displays the VDC function status. |
| VDC OFF SWITCH | [Off / On] | Displays the VDC OFF switch status. |
| PARKING BRAKE | [Off / On] | Displays the parking brake operating status. |
| ACCELE PEDAL MALF | [Off / On] | Displays the accelerator pedal status. |
| DRV TRQ CTRL MODE | [INITIAL / NORMAL / STOP 1 / STOP 2 / LIMIT 1 / PROHIBI] | Displays the status of correction to slightly increase/decrease the drive torque. |
| DRV TRQ CTRL PERMIS 1 | [NO PER / PERMIS] | Displayed but not used. |
| DRV TRQ CTRL PERMIS 2 | [NO PER / PERMIS] | Displayed but not used. |
| DRV TRQ CTRL STOP | [REQ / NO REQ] | Displayed but not used. |
| DRV TRQ CTRL PROHIBIT | [REQ / NO REQ] | Displayed but not used. |
| DRIVE MODE SELECTOR | [STD / SPORT / SNOW / ECO / SPORT+ / PERSO / NOT / NOT SET] | Displays the drive mode select switch selection status. |
| LOG-IN PERMIS | [NO PER / PERMIS] | Displays the login authority status of Infiniti InTuition function. |
| I-KEY LINK | [Off / On] | Displays the Intelligent Key linking status of Infiniti InTuition function. |
| USER | [USER A / USER B / USER C / GUEST] | Displays the current user status of Infiniti InTuition function. |
| ENGINE/TM SETTING | [SPORT / STD / ECO / SNOW] | Displays the engine/transmission setting status with Infiniti drive mode selector function. |
| STRG SETTING | [STD / SPT / TOUR / SPT-L] | Displays the steering characteristic. |
| ALC SETTING | [Off / LOW / HIGH] | Displays the active lane control setting characteristic. |
| ATC SETTING | [Off / On] | Displays the active trace control function setting characteristic. |
| COMBI METER | [STD / SPORT / SNOW / ECO / PERSO] | Displays the combination meter function setting status with Infiniti drive mode selector function. |
| ATC 1 | [Off / On] | Displays the active trace control function operating status. |
| ATC 2 | [Off / On] | Displays the active trace control function operating status. |
| ATC 4 | [Off / On] | Displays the active trace control function operating status. |
| ATC 3 | [Off / On] | Displays the active trace control function operating status. |
| FL TIRE DISP | [DEF / 1] | Displays the status of front LH tire displayed on the information display in the combination meter. |
| FR TIRE DISP | [DEF / 1] | Displays the status of front RH tire displayed on the information display in the combination meter. |
| RL TIRE DISP | [DEF / 1] | Displays the status of rear LH tire displayed on the information display in the combination meter. |
| RR TIRE DISP | [DEF / 1] | Displays the status of rear RH tire displayed on the information display in the combination meter. |
| TURN DISP | [N STEER / LEFT / RIGHT] | Displays the turning direction of active trace control function on the information display in the combination meter. |
| ALC LEVEL | [0 - 4] | Displays the active/inactive status of active lane control. |
| ALC STATUS | [INACT / ACT] | Displays the active lane control operating status. |
| ATC DISP | [Off / On] | Displays the operating status of active trace control function on the information display in the combination meter. |
| ALC DISP | [Off / On] | Displays the operating status of active lane control on the information display in the combination meter. |
| AEB COMMAND 1 | [-] | Displayed but not used. |
| AEB COMMAND 2 | [-] | Displayed but not used. |
| AEB SLIP RATE | [%] | Displayed but not used. |
| ALC SYSTEM | [Off / On] | Displays the active lane control activation status. |
| LANE MARKER (LH) | [NOT / DETECT] | Displays the lane marker (LH) detection status. |
| LANE MARKER (RH) | [NOT / DETECT] | Displays the lane marker (RH) detection status. |
| TURN SIGNAL (LH) | [Off / On] | Displays the turn signal switch (LH) operating status. |
| TURN SIGNAL (RH) | [Off / On] | Displays the turn signal switch (RH) operating status. |
| TURN SIGNAL SWITCH | [Off / LEFT / RIGHT / MALF] | Displays the turn signal switch operating status. |
| DAST | [Off / On] | Displays the direct adaptive steering operating status. |
| ROAD DISTORTION | [1/m] | Displays the road curvature. |
| COMMAND ST ANG | [rad] | Displays the steering command value to direct adaptive steering. |
| ST PINION ANG | [rad] | Displays the steering pinion angle. |
| ST WHL FORCE TORQUE | [Nm] | Displays the steering wheel force torque. |
| COMMAND ST WHL FORCE | [N] | Displays the reaction force command value to direct adaptive steering. |
| LDW DISP | [On / MALF] | Displays the LDW status received from ADAS control unit. |
| LDP DISP | [On / MALF] | Displays the LDP status received from ADAS control unit. |
| BSI DISP | [On / MALF] | Displays the Blind spot intervention function status received from ADAS control unit. |
| ST SWITCH COND | [OK / NG 1 / NG 2] | Displays the steering switch status received from ADAS control unit. |
| BSW COND | [NORMAL / ABNOR] | Displays the BSW status received from ADAS control unit. |
| ADAS COND | [NORMAL / ABNOR] | Displays the ADAS status received from ADAS control unit. |
| COLLISION WARN | [Off / On] | Displays the collision warning status received from ADAS control unit. |
| ICC ACTIVE | [Off / On] | Displays the ICC operating status received from ADAS control unit. |
| IBA ACTIVE | [Off / On] | Displays the FEB operating status received from ADAS control unit. |
| DR BUZZER STATUS | [NO / 1 / 2 / 3 / 1, 2 / 2, 3 / 1, 3 / 4] | Displayed but not used. |
| LDW COND | [On / MALF] | Displays the LDW status transmitted to ADAS control unit. |
| LDP COND | [On / MALF] | Displays the LDP status transmitted to ADAS control unit. |
| BSI COND | [On / MALF] | Displays the blind spot intervention function status transmitted to ADAS control unit. |
| LDP BRAKE CANCEL | [NONE / SLIP / SNOW / VDC OF] | Displays the LDP cancel cause transmitted to ADAS control unit. |
| BSI BRAKE CANCEL | [NONE / SLIP / SNOW / VDC OF] | Displays the blind spot intervention function cancel cause transmitted to ADAS control unit. |
| CAMERA COND | [NORMAL / ABNOR] | Displays the lane camera unit 2 status. |
| CAMERA TEMP COND | [NORMAL / ABNOR] | Displays the lane camera unit 2 status by temperature. |
| CAMERA COMM COND | [NORMAL / ABNOR] | Displays the communication status with the lane camera unit 2 status. |
| CAMERA HIGH TEMP (LDW) | [NORMAL / ABNOR] | Displays the lane camera unit 2 system cancel request due to high temperature (LDW). |
| CAMERA HIGH TEMP (LDP) | [NORMAL / ABNOR] | Displays the lane camera unit 2 system cancel request due to high temperature (LDP) |
| CAMERA HIGH TEMP (BSI) | [NORMAL / ABNOR] | Displays the lane camera unit 2 system cancel request due to high temperature (Blind spot intervention) |
| SIDE RADAR BLOCK CANCEL | [NORMAL / BLOCK] | Displays the side radar status. |
| BSI LAMP REQ (LH) | [Off / On] | Displays the blind spot intervention indicator blink request at blind spot intervention operation (LH). |
| BSI LAMP REQ (RH) | [Off / On] | Displays the blind spot intervention indicator blink request at blind spot intervention operation (RH). |
| LANE DEPARTURE DISP (LH) | [NO DISP / DEVIAT] | Displays the deviating status on the LH side lane. |
| LANE DEPARTURE DISP (RH) | [NO DISP / DEVIAT] | Displays the deviating status on the RH side lane. |
| LDP/BSI ACTIVE | [Off / On] | Displays the LDP/blind spot intervention function operation status. |
| ADAS COND | [NORMAL / ABNOR] | Displayed, but not used |
| DR BUZZER COND | [NORMAL / ABNOR] | Displayed, but not used |
| OUTSIDE TEMP | [°C] | Displays the ambient temperature. |
| WIPER STATUS | [Off / LOW / HIGH / MALF] | Displays the front wiper operating status. |
| Engine RPM | [RPM] | Displays the engine speed. |
| FR shock ab drive current | [A] | Displays the dynamic digital suspension (FR) drive current. |
| FL shock ab drive current | [A] | Displays the dynamic digital suspension (FL) drive current. |
| RR shock ab drive current | [A] | Displays the dynamic digital suspension (RR) drive current. |
| RL shock ab drive current | [A] | Displays the dynamic digital suspension (RL) drive current. |
| Shock absorber control 1 | [Off / On] | Displays the dynamic digital suspension control condition. |
| Shock absorber control 2 | [Off / On] | Displays the dynamic digital suspension control condition. |
| Shock absorber control 3 | [Off / On] | Displays the dynamic digital suspension control condition. |
| FR shock ab command current | [A] | Displays the dynamic digital suspension (FR) command current. |
| FL shock ab command current | [A] | Displays the dynamic digital suspension (FL) command current. |
| RR shock ab command current | [A] | Displays the dynamic digital suspension (RR) command current. |
| RL shock ab command current | [A] | Displays the dynamic digital suspension (RL) command current. |