Diagnosis Procedure
- INTELLIGENT KEY REGISTRATION
Using CONSULT, register all Intelligent Keys again.
Can engine be started with the registered Intelligent Key?
YES
INSPECTION END
NO
GO TO STEP 2 .
- CHECK SELF DIAGNOSTIC RESULT
- Select "Self Diagnostic Result" mode of "BCM" using CONSULT.
- Erase DTC.
- Perform DTC CONFIRMATION PROCEDURE for DTC B219B. Refer to DTC DESCRIPTION .
Is DTC detected?
YES
GO TO STEP 3 .
NO
INSPECTION END
- CHECK COMMUNICATION BETWEEN BCM AND INTELLIGENT KEY
Turn the ignition switch ON for checking communication between BCM and Intelligent Key.
Can the ignition switch be turned ON?
YES
GO TO STEP 4 .
NO
GO TO STEP 5.
- REPLACE TCU
- Replace TCU. Refer to REMOVAL AND INSTALLATION .
- Perform registration of all Intelligent Keys using CONSULT.
INSPECTION END
- REPLACE BCM
- Replace BCM. Refer to REMOVAL AND INSTALLATION .
- Perform registration of all Intelligent Keys using CONSULT.
INSPECTION END