Diagnosis Procedure

1. Turn ignition switch ON.
2. Check signal between Power Window Main Switch harness connector and ground with oscilloscope.

   (+)		(-)	Signal (Reference Value)
   Power Window Main Switch
   Connector	Terminal
   D8	13	Ground	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

Replace Power Window Main Switch. Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 2  .

1. Disconnect BCM connector and Power Window Main Switch connector.
2. Check continuity between BCM harness connector and Power Window Main Switch harness connector.

   BCM		Power Window Main Switch		Continuity
   Connector	Terminal	Connector	Terminal
   M14	54	D8	13	Existed

3. Check continuity between BCM harness connector and ground.

   BCM		(-)	Continuity
   Connector	Terminal
   M14	54	Ground	Not existed

Is the inspection result normal?

YES 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .

NO 

Repair or replace harness.