Diagnosis Procedure

1. Turn ignition switch ON.
2. Check signal between Power Window Sub-Switch harness connector and ground with oscilloscope.

   (+)		(-)	Signal (Reference Value)
   Power Window Sub-Switch
   Connector	Terminal
   D21	16	Ground	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

Replace Power Window Sub-Switch. Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 2  .

1. Disconnect Power Window Main Switch connector.
2. Check continuity between Power Window Main Switch harness connector and Power Window Sub-Switch harness connector.

   Power Window Main Switch		Power Window Sub-Switch		Continuity
   Connector	Terminal	Connector	Terminal
   D8	13	D21	16	Existed

3. Check continuity between Power Window Main Switch harness connector and ground.

   Power Window Main Switch		(-)	Continuity
   Connector	Terminal
   D8	13	Ground	Not existed

Is the inspection result normal?

YES 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .

NO 

Repair or replace harness.