LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> Consult Function (BCM - Intelligent Key) >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item Condition
REQ SW -DR Indicates [On/Off] condition of door request switch (Driver Side)
REQ SW -AS Indicates [On/Off] condition of door request switch (Passenger Side)
REQ SW -BD/TR Indicates [On/Off] condition of trunk lid opener request switch
PUSH SW Indicates [On/Off] condition of push-button ignition switch
SHFTLCK SLNID PWR SPLY Indicates [On/Off] condition of the power supply from BCM to shift lock solenoid
CLUCH SW
NOTE:

This item is displayed, but cannot be monitored

BRAKE SW 1 Indicates [On/Off] * condition of stop lamp switch power supply
BRAKE SW 2 Indicates [On/Off] condition of stop lamp switch
DETE/CANCL SW Indicates [On/Off] condition of P position
SFT PN/N SW Indicates [On/Off] condition of P or N position
UNLK SEN -DR Indicates [On/Off] condition of driver door UNLOCK status
PUSH SW -IPDM Indicates [On/Off] condition of push-button ignition switch
IGN RLY1 -F/B Indicates [On/Off] condition of ignition relay 1
DETE SW -IPDM Indicates [On/Off] condition of P position
SFT PN -IPDM Indicates [On/Off] condition of P or N position
SFT P -MET Indicates [On/Off] condition of P position
SFT N -MET Indicates [On/Off] condition of N position
ENGINE STATE Indicates [STOP/STALL/CRANK/RUN] condition of engine states
VEH SPEED 1 Display the vehicle speed signal received from combination meter by numerical value [km/h]
VEH SPEED 2 Display the vehicle speed signal received from ABS or VDC or TCM by numerical value [km/h]
DOOR STAT-DR Indicates [LOCK/READY/UNLK] condition of driver door status
DOOR STAT-AS Indicates [LOCK/READY/UNLK] condition of passenger door status
DOOR STAT-RR
NOTE:

This item is displayed, but cannot be used

DOOR STAT-RL
NOTE:

This item is displayed, but cannot be used

BK DOOR STATE
NOTE:

This item is displayed, but cannot be monitored

ID OK FLAG Indicates [Set/Reset] condition of Intelligent Key ID
PRMT ENG STRT Indicates [Set/Reset] condition of engine start possibility
PRMT RKE STRT
NOTE:

This item is displayed, but cannot be monitored

I-KEY OK FLAG Indicates [KEY On/NOT On] condition of Intelligent Key ID and Intelligent Key is detected inside vehicle
PRBT ENG STRT Indicates whether or not the engine is in start prohibited status
ID AUTHENT CANCEL TIMER Indicates whether or not it is in engine start possible status when Intelligent Key verification is unnecessary
ACC BATTERY SAVER Indicates [On/Off] whether or not ignition battery saver is in operation
CRNK PRBT TMR Indicates [On/Off] whether or not in cranking prohibited status due to starter motor protection function operation
AUT CRANK TMR Indicates [On/Off] whether or not in AUTO CRANKING MODE status
CRNK PRBT TME Indicates the time for changing from cranking prohibited status to cranking possible status
AUT CRANK TMR Indicates the time that AUTO CRANKING MODE operates
CRANKING TME Indicates the cranking operation time
SHORT CRANK
NOTE:

This item is displayed, but not used

ST RLY-REQ Indicates [On/Off] condition of starter relay control signal
IGN RLY1-REQ Indicates [On/Off] condition of ignition relay (IPDM E/R) control signal
IGN RLY2-REQ Indicates [On/Off] condition of ignition relay (F/B) control signal
DETE SW PWR Indicates [On/Off] condition of the power supply from BCM to the A/T shift selector (detention switch)
IGN RLY3-REQ Indicates [On/Off] condition of blower relay control signal
ACC RLY-REQ Indicates [On/Off] condition of accessory relay control signal
RKE OPE COUN1 When remote keyless entry receiver receives the signal transmitted while operating on Intelligent Key, the numerical value start changing
RKE OPE COUN2
NOTE:

This item is displayed, but cannot be monitored

TRNK/HAT MNTR Indicates [On/Off] condition of trunk room lamp switch
RKE-LOCK Indicates [On/Off] condition of LOCK signal from Intelligent Key
RKE-UNLOCK Indicates [On/Off] condition of UNLOCK signal from Intelligent Key
RKE-TR/BD Indicates [On/Off] condition of trunk open signal from Intelligent Key
RKE-PANIC Indicates [On/Off] condition of panic alarm signal from Intelligent Key
RKE-MODE CHG
NOTE:

This item is displayed, but cannot be monitored

RKE PBD
NOTE:

This item is displayed, but cannot be monitored

* : OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.