LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "PUSH SW" in "Data Monitor" mode.
    3. Check the Push-Button Ignition Switch signal under the following conditions.
    Test item Condition Status
    PUSH SW Push-Button Ignition Switch is pressed ON
    Push-Button Ignition Switch is not pressed OFF

    Is the indication normal?

    YES 

    INSPECTION END.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals