High Fuel Pressure Check
WARNING: This page is about a different variant/trim than selected.
NOTE:
Since the fuel pressure gauge kit cannot be connected, follow the method shown below to check high fuel pressure.
With CONSULT
- Start engine.
- Check "FUEL PRES SEN V" in "Data Monitor" mode of "ENGINE".
Monitor Item Condition Values/Status FUEL PRES SEN V - Engine: After warming up
- Selector lever: P or N
- Air conditioner switch: OFF
- No load
Idle 0.7 - 1.0 V 2000 RPM 0.6 - 1.0 V
Without CONSULT
- Start engine.
- Check fuel rail pressure sensor voltage.
| ECM | Condition | Voltage | ||
|---|---|---|---|---|
| Connector | + | - | ||
| Terminal | ||||
| F143 | 53 | 83 | [Engine is running]
|
0.7 - 1.0 V |
[Engine is running]
|
0.6 - 1.0 V | |||