When A DTC Is Not Stored In ECM
WARNING: This page is about a different variant/trim than selected.
The erasing method depends on a permanent DTC stored in ECM. Refer to the following table.
NOTE:
If the applicable permanent DTC includes multiple groups, perform the procedure of Group B first. If the permanent DTC is not erased, perform the procedure of Group A.
: Applicable : Not applicable
| Group* | Perform "DTC CONFIRMATION PROCEDURE" for applicable DTCs. | Driving pattern | |
|---|---|---|---|
| B | D | ||
| A | * | - | - |
| B | - | * | * |
*: For group, refer to DTC INDEX (For turbo high pressure model) or DTC INDEX (For turbo low pressure model).