Diagnostic Test

With CONSULT 

1. Start the engine.
   CAUTION:

   Never drive the vehicle.

2. On the CONSULT screen, select "DAST 1">>"DATA MONITOR">>"C/M TEMPERATURE".
3. Wait with the ignition switch OFF until the data monitor indication becomes between - 40°C (- 40°F) and 150°C (302°F).

Does the temperature become between - 40°C (- 40°C) and 150°C (302°F) ?

YES 

GO TO STEP 2  .

NO 

Replace steering angle main control module. Refer to REMOVAL AND INSTALLATION .

With CONSULT 

1. Turn the ignition switch ON.
2. Erase self-diagnosis for "DAST 1".
3. Turn the ignition switch OFF and wait for at least 10 seconds.
4. Start the engine.
   CAUTION:

   Never drive the vehicle.

5. Perform self-diagnosis for "DAST 1".

Is DTC "C13DE - 00" detected?

YES 

Replace steering angle main control module. Refer to REMOVAL AND INSTALLATION .

NO 

• Check enlarged contact spring of terminal. Refer to HOW TO CHECK TERMINAL .
• Perform intermittent incident while turning steering wheel. Refer to INTERMITTENT INCIDENT .