DTC Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO STEP 2  .

With CONSULT 

1. Start the engine.
   CAUTION:

   Never drive the vehicle.

2. On the CONSULT screen, select "EPS/DAST 3">>»"DATA MONITOR">>"TORQUE SEN MAIN 1".
3. Check that the value is within standard value while steering the steering wheel.

   Monitor item	Standard value (Approx.)
   TORQUE SEN MAIN 1	- 0.9 N•m ≤ TORQUE SEN MAIN 1 ≤ 0.9 N•m

Is the inspection result normal?

YES 

Steering clutch protection function is active temporarily by overloading the steering wheel. This is not system malfunction.

NO 

Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .