Diagnostic Test
- PERFORM CALIBRATION
Perform the working including "DAST CALIBRATION (MODE1) " performed just before from the first. Refer to WORK PROCEDURE .
GO TO STEP 2 .
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch ON.
- Erase self - diagnosis for "DAST 2".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Turn the ignition switch ON.
- Perform self - diagnosis for "DAST 2".
Is DTC "C13F0 - 00" detected?
YES
Replace steering angle sub control module. Refer to REMOVAL AND INSTALLATION .
NO
INSPECTION END