Input/Output Signal Item
| Reception unit | Transmit unit | Signal name | Description | ||
|---|---|---|---|---|---|
| Chassis Control Module | Lane camera unit 2 | Chassis communication | Detected lane condition signal | Receives detection results of lane marker | |
| Lane camera unit 2 condition signal | Receives Lane Camera Unit 2 condition | ||||
| ABS Actuator And Electric Unit (Control Unit) | CAN Communication | Vehicle speed signal (ABS) | Receives wheel speeds of front wheels | ||
| BCM | CAN Communication | Turn indicator signal | Receives an operational state of the turn signal lamp and the hazard lamp | ||
| Front wiper request signal | Receives an operational state of the front wiper | ||||
| ADAS Control Unit | Chassis communication | LDW ON signal | Receives an ON/OFF state of LDW | ||
| Drive mode select switch | Hard wire | Drive Mode Select Switch signal | Detects the snow mode selection. | ||
| ADAS Control Unit | Display Control Unit | CAN Communication | System selection signal | Receives a selection state of each item in "Driver Aids" selected with the integral switch. | |
| Lane camera unit 2 | Chassis Control Module | Chassis communication | Vehicle speed signal | Transmits a vehicle speed calculated by the Chassis Control Module | |
| Turn indicator signal | Transmits a turn indicator signal received from BCM | ||||
| Combination meter (Via ADAS Control Unit) |
CAN Communication and Chassis communication | LDW system display signal | Transmits a signal to display a state of the system on the information display | ||
| ADAS Control Unit 2 (Via ADAS Control Unit) |
ITS communication and Chassis communication | Steering vibration signal | Transmits steering vibration signal to activates the starring vibration motor | ||