DTC Confirmation Procedure

With CONSULT

1. Turn Ignition Switch ON.
2. Turn Ignition Switch OFF and wait at least 30 seconds.
3. Turn Ignition Switch ON and wait at least 5 seconds or more.
4. Select "Self Diagnostic Result" mode of "SONAR" using CONSULT.
5. Check DTC.

Is DTC B272D detected?

YES (SHORT-BAT) 

Proceed to DIAGNOSIS PROCEDURE .

YES (OPEN/SHORT-GND) 

Proceed to DIAGNOSIS PROCEDURE .

NO-1 

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO-2 

Confirmation after repair: INSPECTION END