Diagnosis Procedure

1. Connect Around View Monitor Control Unit connector and door mirror (passenger side) connector.
2. Turn Ignition Switch ON.
3. Check the signal between Around View Monitor Control Unit harness connector and ground.

   Terminals			Condition	Reference value
   (+)		(-)
   Around View Monitor Control Unit
   Connector	Terminal
   B51	61	Ground	"CAMERA" switch is ON or shift position is "R".	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

Replace Around View Monitor Control Unit. Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 2  .

1. Turn Ignition Switch OFF.
2. Disconnect Around View Monitor Control Unit harness connector and door mirror (passenger side) harness connector.
3. Check the continuity between Around View Monitor Control Unit harness connector and door mirror (passenger side) harness connector.

   Around View Monitor Control Unit		Door mirror (passenger side)		Continuity
   Connector	Terminal	Connector	Terminal
   B51	61	D65	11	Existed

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Repair or replace malfunctioning parts.

Check the continuity between Around View Monitor Control Unit harness connector and ground.

Is the inspection result normal?

YES 

Replace side camera RH. Refer to REMOVAL AND INSTALLATION .

NO 

Repair or replace malfunctioning parts.