Work Procedure
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" in "MULTI AV" to save or print current vehicle specification.
NOTE:If "Before Replace ECU" of "Read / Write Configuration" can not be used, use the "Manual Configuration" after replacing AV Control Unit.
GO TO STEP 2 .
- REPLACE AV CONTROL UNIT
Replace AV Control Unit. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to WORK PROCEDURE .
WORK END