Component Function Check

1. Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "Data monitor" mode of "AUTO DRIVE POS." with CONSULT.
2. Check Lifting Switch (Front) signal under the following conditions.

   Monitor Item	Condition		Status
   LIFT FR SW-UP	Lifting Switch Front (up)	Operate	On
   		Release	Off
   LIFT FR SW-DN	Lifting Switch Front (down)	Operate	On
   		Release	Off

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .