Diagnosis Procedure

1. Turn Ignition Switch ON.
2. Check the signal between Around View Monitor Control Unit harness connector and ground.

   Terminals			Condition	Reference value
   (+)		(-)
   Around View Monitor Control Unit
   Connector	Terminal
   B51	67	Ground	"CAMERA" switch is ON or shift position is "R".	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

Replace Around View Monitor Control Unit. Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 2  .

1. Turn Ignition Switch OFF.
2. Disconnect Around View Monitor Control Unit harness connector and front camera harness connector.
3. Check the continuity between Around View Monitor Control Unit harness connector and front camera harness connector.

   Around View Monitor Control Unit		Front camera		Continuity
   Connector	Terminal	Connector	Terminal
   B51	67	E116	6	Existed

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Repair or replace malfunctioning parts.

Check the continuity between Around View Monitor Control Unit harness connector and ground.

Is inspection result normal?

YES 

Replace front camera. Refer to REMOVAL AND INSTALLATION .

NO 

Repair or replace malfunctioning parts.