Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item | Unit | Contents |
|---|---|---|
| STARTERSW | On/Off | The Ignition Switch position "OFF (other than cranking) / ON (cranking)" judged from the Ignition Switch signal. |
| SETSW | On/Off | ON/OFF status judged from the setting Switch signal. |
| MEMORYSW 1 | On/Off | ON/OFF status judged from the Seat Memory Switch 1 signal. |
| MEMORYSW 2 | On/Off | ON/OFF status judged from the Seat Memory Switch 2 signal. |
| DETENTSW | On/Off | The selector lever status "OFF (P position) / ON (other than P position or press the selector button with selector lever in P position)" judged from the detention Switch signal. |
| STEERING STATUS | LOCK/UNLOCK | Power supply position "LOCK/UNLOCK (other than lock)" judged by BCM. |
| SLIDESW-FR | On/Off | ON/OFF status judged from the Sliding Switch (forward) signal. |
| SLIDESW-RR | On/Off | ON/OFF status judged from the Sliding Switch (backward) signal. |
| RECLNSW-FR | On/Off | ON/OFF status judged from the Reclining Switch (forward) signal. |
| RECLNSW-RR | On/Off | ON/OFF status judged from the Reclining Switch (backward) signal. |
| LIFTFRSW-UP | On/Off | ON/OFF status judged from the lifting Switch front (up) signal. |
| LIFTFRSW-DN | On/Off | ON/OFF status judged from the lifting Switch front (down) signal. |
| LIFTRRSW-UP | On/Off | ON/OFF status judged from the lifting Switch rear (up) signal. |
| LIFTRRSW-DN | On/Off | ON/OFF status judged from the lifting Switch rear (down) signal. |
| TILT SW-UP | On/Off | ON/OFF status judged from the tilt Switch (up) signal. |
| TILT SW-DOWN | On/Off | ON/OFF status judged from the tilt Switch (down) signal. |
| TELESCO SW-FR | On/Off | ON/OFF status judged from the telescoping Switch (forward) signal. |
| TELESCO SW-RR | On/Off | ON/OFF status judged from the telescoping Switch (backward) signal. |
| MIRCONSW-UP | On/Off | ON/OFF status judged from the mirror Switch (up) signal. |
| MIRCONSW-DN | On/Off | ON/OFF status judged from the mirror Switch (down) signal. |
| MIRCONSW-RH | On/Off | ON/OFF status judged from the Door Mirror Remote Control Switch (passenger side) signal. |
| MIRCONSW-LH | On/Off | ON/OFF status judged from the Door Mirror Remote Control Switch (driver side) signal. |
| MIRCHNGSW-R | On/Off | ON/OFF status judged from the Door Mirror Remote Control Switch (Switching to right) signal. |
| MIRCHNGSW-L | On/Off | ON/OFF status judged from the Door Mirror Remote Control Switch (Switching to left) signal. |
| TILT PULSE | - | Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases. |
| TELESCO PULSE | - | Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases. |
| MIR/SENRHU-D | V | Voltage input from door Mirror Sensor (passenger side) up/down is displayed. |
| MIR/SENRHR-L | V | Voltage input from door Mirror Sensor (passenger side) left/right is displayed. |
| MIR/SENLHU-D | V | Voltage input from door Mirror Sensor (driver side) up/down is displayed. |
| MIR/SENLHR-L | V | Voltage input from door Mirror Sensor (driver side) left/right is displayed. |
| SLIDE PULSE | - | Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases. |
| RECLN PULSE | - | Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases. |
| LIFT FR PULSE | - | Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases. |
| LIFT RR PULSE | - | Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases. |
| VEHICLE SPEED | - | Display the vehicle speed signal received from combination meter by numerical value [km/h]. |
| P RANG SW CAN | On/Off | ON/OFF status judged from the P range Switch signal. |
| R RANGE (CAN) | On/Off | ON/OFF status judged from the R range Switch signal. |
| DOORSW-FL | Open/Close | OPEN/CLOSE status judged from the door Switch (driver side) signal. |
| DOORSW-FR | Open/Close | OPEN/CLOSE status judged from the door Switch (passenger side) signal. |
| IGN ON SW | On/Off | ON/OFF status judged from the Ignition Switch signal. |
| ACC ON SW | On/Off | ON/OFF status judged from the ACC Switch signal. |
| KYLS DR UNLK | On/Off | ON/OFF status judged from the driver side door unlock actuator output Switch signal. |
| KEYLESS ID | ID1/ID2/ID3/ID4 | Key ID status judged from the key ID signal. |
| VHCL SPEED (ABS) | RCV/NORCV | Received/Not received status judged from vehicle speed signal. |
| HANDLE | LHD/RHD | RHD/LHD status judged from handle position signal. |
| TRANSMISSION | AT/MT | AT/MT status judged from transmission. |
| INITIAL STATE | DONE/YET | Displays the default status of the log-in function. |
| USER1 REGIST | DONE/YET | Displays the USER1 registration or non-registration status of the log-in function. |
| USER2 REGIST | DONE/YET | Displays the USER2 registration or non-registration status of the log-in function. |
| USER3 REGIST | DONE/YET | Displays the USER3 registration or non-registration status of the log-in function. |
| USER4 REGIST | DONE/YET | Displays the USER4 registration or non-registration status of the log-in function. |
| LOGIN USER | User1/User2/User3/User4 | Displays the current log-in user with the log-in function. |
| USER1 SW | On/Off | ON/OFF status judged from user1 change Switch signal. |
| USER2 SW | On/Off | ON/OFF status judged from user2 change Switch signal. |
| USER3 SW | On/Off | ON/OFF status judged from user3 change Switch signal. |
| USER4 SW | On/Off | ON/OFF status judged from user4 change Switch signal. |
| LOGIN USER CHANGE | PRBT/PRMT | Display the user change permission or inhibition status of the log-in function. |
| KEY LINK FUNCTION | On/Off | Displays the ON/OFF status of the Intelligent Key interlock function. |
| KEY NUMBER | KEY 1/KEY 2/KEY 3/KEY 4 |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 1 | NO REG/ACT/INACT |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 2 | NO REG/ACT/INACT |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 3 | NO REG/ACT/INACT |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 4 | NO REG/ACT/INACT |
NOTE:
This item is displayed, but cannot be monitored |
| Log-in user setting 1 | Off/User1/User2/User3/User4 | The user number that is used for transmitting the settings of the log-in function is displayed. |
| Log-in user setting 2 | Off/User1/User2/User3/User4 | The user number that is used for receiving the settings of the log-in function is displayed. |
| Log-in user setting copy status | On/Off | The copy status of the Log-in function is displayed with "On/Off". |
| Forward SW | On/Off | ON (folded down)/OFF (other than folded down) status judged from the folded up/folded down condition signal. |
| Walk in SW | On/Off | ON (pressed)/OFF (other than pressed) status judged from the Power Walk-In Switch operation signal. |
| Forward limit SW | On/Off | ON (front edge)/OFF (other than front edge) status judged from the front end position signal. |
| Seat belt buckle SW | On/Off | ON (fastened)/OFF (other than fastened) status judged from the seat belt fastening/releasing condition signal. |