On Board Diagnosis Item
WARNING: This page is about a different variant/trim than selected.
The on board diagnostic system has the following functions.
| Diagnostic Test Mode | Function |
|---|---|
| Bulb check | MIL can be checked. |
| SRT status | ECM can read if SRT codes are set. |
| Malfunction warning | If ECM detects a malfunction, it illuminates or blinks MIL to inform the driver that a malfunction has been detected. |
| Accelerator pedal released position learning | ECM can learn the accelerator pedal released position. Refer to DESCRIPTION . |
| Throttle valve closed position learning | ECM can learn the throttle valve closed position. Refer to DESCRIPTION . |
| Idle air volume learning | ECM can learn the idle air volume. Refer to DESCRIPTION . |
| Wastegate actuator posi learn value clear | The initial position of the wastegate valve position can be adjusted. Refer to DESCRIPTION . |
| Electric intake valve timing control learning | The initial position of the electric intake valve timing control actuator can be adjusted. Refer to DESCRIPTION . |
| OCS reset | Engine oil date reset. Refer to DESCRIPTION . |