LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q60 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System (Introduction) (VR30DDTT)) >> System Description >> System >> Engine Control System >> Fail-Safe (Turbo Low Pressure Model) >> Fail Safe List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail Safe List

WARNING: This page is about a different variant/trim than selected.

*: Applicable -: Not applicable

DTC No. Detected Items Vehicle Behavior
Pattern Others
A B C D E F G
U0101 CAN communication line - - - * - - - ECM operates active grille shutter to fully-open position.
U012E
U042F		 Engine communication - - - * * - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
- - - * - * -
U0284 Active grille shutter - - - * - - - ECM operates active grille shutter to fully-open position.
U1040
U1044		 Engine communication - - - * - - - ECM operates active grille shutter to fully-open position.
P0010
P0020		 Electric intake valve timing control module - - - * * - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
- - - * - * -
P0011
P0021		 Intake valve timing control - - - * - - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
NOTE:

When VTC mechanism sticks, camshaft position does not change from position of stuck angle.
P0014
P0024		 Exhaust valve timing control - - - * - - - -
P0046
P004B		 Electric wastegate actuator motor - * - * - - - ECM stops the electric wastegate actuator control. (Wastegate valve opens)
P0078
P0084		 Exhaust valve timing control solenoid valve - - - * - - - -
P0087
P0088		 Fuel rail pressure control * - - * * - - -
* - - - * - -
P0090 High pressure fuel pump * - - * * - - -
P0101
P010B		 Mass air flow sensor * - - - * - - -
- * - * - - * -
P0102
P0103
P010C
P010D		 - * - * - - * -
P0117
P0118		 Engine coolant temperature sensor - - - - - * - -
P0122
P0123
P0222
P0223
P0227
P0228
P1239
P2132
P2133
P2135		 Throttle position sensor - - - * - - - The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees.
The ECM regulates the opening speed of the throttle valve to be slower than the normal condition.
So, the acceleration will be poor.
P0171
P0172
P0174
P0175		 Fuel injection system * - - - - * - -
P0190 Fuel rail pressure sensor * - - * - * - -
P0191
P0192
P0193		 * - - - * - - -
P0197
P0198		 Engine oil temperature sensor - - - - - - - Exhaust valve timing control does not function.
P0201
P0202
P0203
P0204
P0205
P0206		 Fuel injector * - - - * - - -
P0234
P1334		 Turbocharger system - * - * - - - -
P0235
P0237
P0238
P0241
P0242		 Turbocharger boost sensor - * - * - - - -
P0300
P0301
P0302
P0303
P0304
P0305
P0306		 Misfire * - - - - * - -
P0335 Crankshaft position sensor - - - * * - - -
- - - * - * -
P0340
P0345		 Intake camshaft position sensor - - - * * - - -
- - - * - * -
P1140
P1145		 * - - * - - * -
P0365
P0390		 Exhaust camshaft position sensor - - - * - - - -
P0500 Vehicle speed sensor * - - - - * - -
P0524 Engine oil pressure - - - - - - -
  • ECM illuminates engine oil pressure warning lamp on the combination meter.
  • Engine speed will not rise more than 4, 000 RPM due to the fuel cut.
  • Fail-safe is canceled when Ignition Switch OFF → ON.
P059F Active grille shutter - - - * - - -
  • When a voltage and temperature related malfunction is detected, the active grille shutter stops at the position of detection.
  • Except for the above case, operates the active grille shutter to fully opened position.
P0603
P0607		 ECM - - - - - - - -
- * - - - - - ASCD operation may be deactivated.
P0604 - - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P0605 - - - - - - - -
- - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P0606 - - - - - - - -
- - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P060A - - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
- * - * - - -
  • ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
  • ASCD operation may be deactivated.
 
P060B - - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P062B - - - - - - - -
* - - - * - -
P0641 Sensor power supply - - - * * - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
- - - * - * -
P0643 - - - * - - - -
P14A4
P14A5		 Charge air cooler cooling electric water pump - - - - - - - Charge air cooler cooling electric water pump runs at the command speed.
P14A7 - - - - - - - Charge air cooler cooling electric water pump runs at full speed.
P14A9
P14AA
P14AC		 - - - - - - - Charge air cooler cooling electric water pump stops.
P1197 Out of gas - - - * - - - -
P119A
P119B
P119C		 Fuel pressure sensor * - - - * - - -
P1233
P2101		 Electric throttle control - - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P1236
P2118		 Throttle control motor - - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P1238
P2119		 Electric throttle control actuator - * - - - - - -
- - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P1290
P2100
P2103		 Throttle control motor relay - - - * - - - ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approximately 5 degrees) by the return spring.
P1805 Brake switch - - - - - - - ECM controls the electric throttle control actuator by regulating the throttle opening to a small range.
Therefore, acceleration will be poor.
Vehicle condition Driving condition
When engine is idling Normal
When accelerating Poor acceleration
P2122
P2123
P2127
P2128
P2138		 Accelerator pedal position sensor - - - * - - - -
P23E9
P23EA
P2614
P2615		 Intake camshaft position sensor - - - * * - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
- - - * - * -
P23EB
P2616
P2617
P2618		 - - - * * - -
P2619 - - - * - * -
P2562
P2566
P2586
P2590		 Electric wastegate control valve position sensor - * - * - - - ECM stops the electric wastegate actuator control. (Wastegate valve opens)
P2563
P2564
P2565
P2587
P2588
P2589		 -
P34A4
P34A5
P34A6
P34A7
P34A8
P34A9
P34AA
P34AB
P34AC
P34AD
P34B0
P34B1		 Electric intake valve timing control actuator - - - * * - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
NOTE:

Normal bank transitions intermediate F/S valve timing.
P34C4
P34C5		 Electric intake valve timing control actuator - - - * * - - ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P34C8 Electric intake valve timing control module - - - * * - - ECM stops the Electric Valve Timing Control. (The camshaft returns to the position of most retard angle.)
- - - * - * -
scientia non olet · About LEMON Manuals