April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

PRECONDITIONING

Check that the engine is cold [coolant temperature: 50 °C (122 °F) or less].

Is the engine cold?

YES

GO TO STEP 2 .

NO

Park the vehicle at a cold place and cool down the engine. And then, GO TO STEP 2 .

INITIALIZING A LEARNING VALUE

With CONSULT
1. Start the engine and let it idle at least 10 seconds.
2. On CONSULT screen, select "ENGINE" >> "Active Test" >> "WASTEGATE ACTUATOR".
3. Operate the actuator from the fully closed position to the fully open position and check that actual value is within the range of (- 0.00052) - (+ 0.00052) m when the target value is set at 0 m.
END