Diagnostic Test

With CONSULT 

1. Turn the ignition switch ON.
2. Erase self-diagnosis for "DAST 1".
3. Turn the ignition switch OFF and wait for at least 10 seconds.
4. Start the engine.
   CAUTION:

   Never drive the vehicle.

5. Turn the steering wheel from full left stop to full right stop.
6. Return the steering wheel to the straight-ahead position.
7. Perform self-diagnosis for "DAST 1".

Is DTC "C13A1 - 00" detected?

YES 

Replace steering force control module. Refer to REMOVAL AND INSTALLATION .

NO 

• Check enlarged contact spring of terminal. Refer to HOW TO CHECK TERMINAL .
• Perform intermittent incident while turning steering wheel. Refer to INTERMITTENT INCIDENT .