DTC Confirmation Procedure

If DTC "C13AB - 00" is displayed with DTC "C13A8 - 00", "C13A9 - 00", "C13AD - 00" or "C13D4 - 00", first perform the confirmation procedure (trouble diagnosis) for DTC "C13AB - 00".

Is applicable DTC detected?

YES - 1 (C13A8-00 is detected) 

Refer to DIAGNOSIS PROCEDURE .

YES - 2 (C13A9-00 is detected) 

Refer to DIAGNOSIS PROCEDURE .

YES - 3 (C13AD-00 is detected) 

Refer to DIAGNOSIS PROCEDURE .

YES - 4 (C13D4-00 is detected) 

Refer to DIAGNOSIS PROCEDURE .

NO 

GO TO STEP 2  .

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO STEP 3  .

With CONSULT 

1. Start the engine.
   CAUTION:

   Never drive the vehicle.

2. Perform self-diagnosis for "DAST 1".

Is DTC "C13AB - 00" detected?

YES 

Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

NO - 1 

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2 

Confirmation after repair: INSPECTION END