DTC Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO STEP 2  .

With CONSULT 

1. Start the engine.
   CAUTION:

   Never drive the vehicle.

2. Perform self-diagnosis for "DAST 2".

Is DTC "C13AD - 00" detected?

YES 

Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

NO - 1 

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2 

Confirmation after repair: INSPECTION END