Freeze Frame Data (FFD)
The following vehicle status is recorded when DTC is detected and is displayed.
| Freeze Frame Data Item | Unit | Description |
|---|---|---|
| ODO/TRIP METER | Km | Display the odometer value from combination meter via CAN communication. |
| BATTERY VOLT | V | Displays the power supply voltage for power steering control module. |
| IGN SW | OFF/ON | Display the status of ignition switch. |
| ENGINE STATUS | STOP/RUN/CRANK | Displays the engine status based on the engine status signal transmitted by CAN communications. |
| Steering mode status | Standard/Sports/Touring | Displays the status of steering mode based on the steering mode status signal transmitted by CAN communications. |
| VEHICLE SPEED | km/h | Display the vehicle speed from vehicle speed signal via CAN communication. |
| STEERING ANGLE SIGNAL | deg | Displays the steering angle based on steering angle signal transmitted by CAN communications. |
| STEERING ANGLE SPEED | deg/s | Displays the steering angle speed based on the steering angle signal transmitted by CAN communications. |
| STEERING TORQUE | Nm | Displays steering torque detected by torque sensor. |
| MOTOR CURRENT | A | Display the current value consumed by EPS motor. |
| Target motor current | A | Displays the target motor current value. |
| C/U TEMP | °C | Displays the temperature of the power steering control module. |