Diagnostic Test
- START
- Turn Ignition Switch ON.
- Check information display of the Combination Meter.
Is Distance to Engine Oil Change displayed?
YES
GO TO STEP 3 .
NO
GO TO STEP 2 .
- SELECT OIL CONTROL SYSTEM MODE
Push the Display next switch and select oil control system mode.
GO TO STEP 3 .
- RESET ENGINE OIL DATA
- Press and hold the Display Next switch at least 1 second while Distance to Engine Oil Change is displayed.
- Stop pressing the Display Next switch, and a few seconds later, check that the value of Distance to Engine Oil Change is reset.
END