Trunk Lid Opener Request Switch Operation (Do Not Use Intelligent Key System): Notes
- When trunk lid opener request switch is turned ON, BCM transmits trunk lid open request signal to trunk closure assembly.
- When trunk closure control unit, integrated into the trunk closure assembly, receives the trunk lid open request signal, it operates trunk closure motor to release the interlocking of trunk lid lock and trunk lid striker, and then trunk lid opens.
- To prevent performing open operation due to mis-operation of trunk lid opener switch by owner, the trunk lid open function is activated when trunk closure control unit receives the trunk lid open request signal from BCM for more than 0.2 sec.
- After trunk closure control unit detects that the trunk is opened, it stops the trunk closure motor and then operates in reverse direction to the neutral position.
- The trunk closure control unit transmits trunk lid open/closed status signal to BCM.
- If trunk lid open operation stops accidentally (because of mislatching, etc.), trunk lid can be open mechanically using trunk key cylinder.
- For trunk lid auto closure system, refer to SYSTEM DESCRIPTION .