Diagnostic Test
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.
GO TO STEP 2 .
- REPLACE BCM
Replace BCM. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to WORK PROCEDURE .
GO TO STEP 4 .
- INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
WORK END