April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

CAUTION:

Use "Manual Configuration" only when "Parts number" of the ADAS control unit cannot be read.
If an error occurs during configuration, start over from the beginning.

CHECKING PARTS NUMBER

With CONSULT Configuration
1. Select "Before Replace ECU" of "Read/Write Configuration".
2. Check that "Parts number" is displayed on the CONSULT screen.
Is "Parts number" displayed?

YES

GO TO STEP 2 .

NO

GO TO STEP 6 .

VERIFYING PARTS NUMBER (1)

With CONSULT Configuration

Compare a "Parts number" displayed on the CONSULT screen with the one searched by using FAST (service parts catalogue) to check that the these "Parts number" agree with each other.

NOTE:
For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".

GO TO STEP 3 .

SAVING PARTS NUMBER

With CONSULT Configuration

Save "Parts number" on CONSLT.

GO TO STEP 4 .

REPLACE ADAS CONTROL UNIT (1)

Replace ADAS control unit. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 5 .

WRITING (AUTOMATIC WRITING)

With CONSULT Configuration
1. Select "After Replace ECU" of "Re/programming, Configuration" or that of "Read / Write Configuration".
2. Select the "Parts number" agreeing with the one stored on CONSULT and the one searched by using FAST (service parts catalogue) to write the "Parts number" into the ADAS control unit.
  NOTE:
  For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".
GO TO STEP 8 .

REPLACE ADAS CONTROL UNIT (2)

Replace ADAS control unit. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 7 .

WRITING (MANUAL WRITING)

With CONSULT Configuration
1. Select "Manual Configuration".
2. Select the "Parts number" searched by using FAST (service parts catalogue) to write the "Parts number" into the ADAS control unit.
  NOTE:
  For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".
GO TO STEP 8 .

VERIFYING PARTS NUMBER (2)

With CONSULT Configuration

Compare a "Parts number" displayed on the CONSULT screen with the one searched by using FAST (service parts catalogue) to check that the these "Parts number" agree with each other.

NOTE:
For the "Parts number" searched by using FAST (service parts catalog), use the last five digits of the "Parts number".

GO TO STEP 9 .

OPERATION CHECK

Confirm that each function controlled by ADAS control unit operates normally.

WORK END