LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q70L 5.6, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (Except Hybrid) >> DTC/Circuit Diagnosis >> Encoder >> Driver Side >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK ENCODER SIGNAL

    1. Turn ignition switch ON.
    2. Check signal between power window main switch harness connector and ground with oscilloscope.
      (+) (-) Signal
      (Reference value)
      Power window main switch
      Connector Terminal
      D22 11 Ground Refer to following signal
      12
      G06934392Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2  .

  2. CHECK ENCODER SIGNAL CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector and front power window motor (driver side) connector.
    3. Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.
      Power window main switch Front power window motor
      (driver side)      		 Continuity
      Connector Terminal Connector Terminal
      D22 11 D10 5 Existed
      12 3
    4. Check continuity between power window main switch harness connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D22 11 Not existed
      12

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Repair or replace harness.

  3. CHECK ENCODER POWER SUPPLY CIRCUIT 1

    1. Connect power window main switch connector.
    2. Turn ignition switch ON.
    3. Check voltage between front power window motor (driver side) harness connector and ground.
      (+) (-) Voltage (V)
      (Approx.)
      Front power window motor (driver side)
      Connector Terminal
      D10 4 Ground 12

    Is the inspection result normal?

    YES 

    GO TO STEP 5  .

    NO 

    GO TO STEP 4  .

  4. CHECK ENCODER POWER SUPPLY CIRCUIT 2

    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector.
    3. Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.
      Power window main switch Front power window motor (driver side) Continuity
      Connector Terminal Connector Terminal
      D22 3 D10 4 Existed
    4. Check continuity between power window main switch harness connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D22 3 Not existed

    Is the inspection result normal?

    YES 

    Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

  5. CHECK GROUND CIRCUIT 1

    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector.
    3. Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.
      Power window main switch Front power window motor (driver side) Continuity
      Connector Terminal Connector Terminal
      D22 10 D10 6 Existed

    Is the inspection result normal?

    YES 

    GO TO STEP 6  .

    NO 

    Repair or replace harness.

  6. CHECK GROUND CIRCUIT 2

    1. Connect power window main switch connector.
    2. Check continuity between power window main switch connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D22 10 Existed

    Is the inspection result normal?

    YES 

    Replace front power window motor (driver side). Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals