LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX30 Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (ASCD) >> Ecu Diagnosis Information >> Electronic Stability Program Control Unit >> Reference Value >> Consult Data Monitor Standard Value
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult Data Monitor Standard Value

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item Condition Reference values in normal operation
Wheel speed at left front axle Vehicle stopped 0.00 km/h (MPH)
When driving* Nearly matches the speedometer display (within +-10%)
Wheel speed at right front axle Vehicle stopped 0.00 km/h (MPH)
When driving* Nearly matches the speedometer display (within +-10%)
Wheel speed at left rear axle Vehicle stopped 0.00 km/h (MPH)
When driving* Nearly matches the speedometer display (within +-10%)
Wheel speed at right rear axle Vehicle stopped 0.00 km/h (MPH)
When driving* Nearly matches the speedometer display (within +-10%)
Air gap Reserve RL - NOT OK
- OK
Air gap Reserve RR - NOT OK
- OK
Longitudinal Acceleration Vehicle stopped Approx. 0 m/s2
When during acceleration/deceleration Changes according to the longitudinal acceleration/deceleration
Lateral Acceleration Vehicle stopped Approx. 0 m/s2
When left/right turn Changes according to the left/right turn
Turn rate Vehicle stopped Approx. 0 °/s
When left/right turn Changes according to the left/right turn
Steering wheel angle When vehicle driving straight Approx. 0 °
When steering wheel is steered to LH/RH Changes according to the steered to LH/RH
Brake pressure When brake pedal is not depressed Approx. 0 bar
When brake pedal is depressed Pressure increase according to brake pedal effort
Brake pressure at FL wheel When brake pedal is not depressed Approx. 0 bar
When brake pedal is depressed Pressure increase according to brake pedal effort
Brake pressure at RL wheel When brake pedal is not depressed Approx. 0 bar
When brake pedal is depressed Pressure increase according to brake pedal effort
Supply voltage solenoid valves Ignition switch ON -
Supply voltage of return pump Ignition switch ON -
Supply voltage of control unit Ignition switch ON -
VACUUM SENSOR Engine running -
Engine stopped -
Status of brake vacuum sensor Engine running VALID
Engine stopped INVALID
Signal high of brake light SW When brake pedal is depressed On
When brake pedal is not depressed OFF
Signal low of brake light SW When brake pedal is depressed On
When brake pedal is not depressed OFF
PARKING BRAKE When electric parking brake is active On
When electric parking brake is released OFF
Status of switch ESP Off When VDC function is OFF Yes
When VDC function is ON No
Outlet Valve Left Rear Active On
Inactive OFF
PUMP Active On
Inactive OFF
Acceleration sensor calibration During calibration Yes
Not caribration No

* : Confirm tire pressure is standard value.