Fail-Safe Control By DTC
Electronic ignition switch control unit performs fail-safe control when any DTC are detected.
| Display contents of CONSULT | Fail - safe | |||
|---|---|---|---|---|
| U0122 | 08 | Communication error | [BUS SIGNAL/MESSAGE FAILURES] | Inhibit engine cranking |
| U0141 | 00 | Communication error | [NO SUBTYPE INFO] | Inhibit engine cranking |
| U1198 | 00 | Communication error | [NO SUBTYPE INFO] | Inhibit shift lever change |
| U140F | 00 | Engine variant | [NO SUBTYPE INFO] | Inhibit engine cranking |
| B1A39 | 11 | Two-way radio receiver | [CIRC SHORT TO GRND] | Inhibit central locking system |
| B21DC | 01 | Electronic ignition lock | [ELECTRICAL MALFUNCTION] | Inhibit stop/start system |