Inspection Procedure
- CHECK BATTERY TERMINALS CONNECTION
Check if battery terminals are clean and tight.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair battery terminals connection.
- CHECK ALTERNATOR INSTALLATION CONDITION (ALTERNATOR GROUND)
Check alternator installation condition.
Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Tighten alternator bolt to the specified torque.
- CHECK DRIVE BELT TENSION
Check drive belt tension. Refer to INSPECTION .
Is the inspection result normal?
YES
INSPECTION END
NO
Repair as needed.