April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

WARNING: This page is about a different variant/trim than selected.

SAVING DATA

With CONSULT
1. Turn the ignition switch OFF to ON.
2. Select "SAVING DATA FOR REPLC CPU" in "WORK SUPPORT" for "ALL MODE AWD/4WD".
3. Select "Start".
4. Check that "Completed" is displayed.
GO TO STEP 2 .

PERFORM REPLACING AWD CONTROL UNIT

Replace AWD control unit. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 3 .

WRITING DATA

With CONSULT
1. Turn the ignition switch OFF to ON.
2. Select "WRITING DATA FOR REPLC CPU" in "WORK SUPPORT" for "ALL MODE AWD/4WD".
3. Select "Start".
4. Check that "Completed" is displayed.
WORK END