LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX30 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case) >> System Description >> Diagnosis System (AWD Control Unit) >> Consult Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different variant/trim than selected.
NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item (Unit) Remarks
Voltage (V) -
POWER SUPPLY (V) -
Status of solenoid valve Status of AWD solenoid valve.
  • Diag init: Diagnosis initialize
  • Ia no vld: Inactive no valid information
  • Ia sh gnd: Inactive short to ground
  • Ia sh pwr: Inactive short to power supply
  • Ia op ld: Inactive open load
  • Ia no mlf: Inactive no malfunction
  • Ac no vld: Active no valid information
  • Ac el mlf: Active electrical malfunction
  • Ac no mlf: Active no malfunction
Resistance of solenoid valve (ohm) Resistance of AWD solenoid valve.
MAIN ODOMETER READING (km) -
Current thermal load of sv (%) Current thermal load of AWD solenoid valve in percent.
Status of control unit Status of AWD control unit
  • No state: No state
  • Init comp: Initialize component
  • Normal Operation: Normal operation
  • Cmp run: Components run
  • Not defined: Not defined
  • Sd comp: Shutdown components
  • Rdy fr sd: Ready for shutdown
  • Error: Error
  • Temp err: Temporary error
  • Prmnt err: Permanent error
  • Idle: Idle
  • OFF: Off
Distance driven snc lst oil cng (km) Distance driven since last oil change.
Clutch work range 1 (kWh) -
Clutch work range 2 (kWh) -
Clutch work range 3 (kWh) -
Gear efficiency (kWh) -
Drag loss (kWh) -
Oil work (kWh) -