Tire Pressure Sensor Registration: Notes
NOTE:
To register a new tire pressure sensor, a Nissan CONSULT must be used. The Transmitter Activation Tool (J-45295-A) or Signal Tech II (J-50190) can aid in registration procedure.
IMPORTANT:
The Signal Tech II must be updated with software version 1.1.48 or newer in order to perform the procedures below. The Signal Tech II software updates can only be downloaded from a CONSULT unit with ASIST. Other versions of ASIST will not show the updates.
NOTE:
If tire pressure sensor was replaced, the new sensor will be in an "asleep" mode. To wake up sensor, see Transmitter Wake-Up Operation .