DTC Detection Logic
| DTC No. | CONSULT screen terms | DTC detecting condition | ||
|---|---|---|---|---|
| DTC (Trouble diagnosis content) |
Malfunction type | |||
| P061B | 00 | CONTROL MODULE (Internal control module torque calculation performance) |
NO SUBTYPE INFORMATION | The torque calculation of the control unit has a malfunction. |
| 01 | ELECTRICAL MALFUNCTION | The torque calculation of the control unit has a malfunction. There is a general electrical malfunction. | ||
| 05 | SYSTEM PROGRAMMING ERROR | The torque calculation of the control unit has a malfunction. There is a programming malfunction. | ||
| 06 | ALGORITHM BASED ERROR | The torque calculation of the control unit has a malfunction. There is an algorithm malfunction. | ||
| 08 | BUS SIGNAL/MESSAGE ERROR | The torque calculation of the control unit has a malfunction. There is a signal malfunction or the message is malfunction. | ||
| 85 | SIG ABOVE ALLOWABLE RANGE | The torque calculation of the control unit has a malfunction. There is a signal above the permissible limit value. | ||