DTC Detection Logic
| DTC | CONSULT screen item | DTC detected condition | ||||
|---|---|---|---|---|---|---|
| [Trouble diagnosis content] | [Malfunction type] | |||||
| C03B2 | 00 | CAN message E-IGN lock C/U [The CAN message from control unit (Electronic ignition lock control unit) is malfunction] |
[NO SUBTYPE INFORMATION] | Diagnosis condition | Ignition switch ON | |
| Signal (terminal) | - | |||||
| Threshold | If the message from electronic ignition switch control unit is incorrect (message length incorrect) then an error is set. This error is set, when the malfunction detection time is exceeded. | |||||
| Diagnosis delay time | 150 ms | |||||