DTC Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO STEP 2  .

With CONSULT

1. Vehicle on a flat area (standstill).
2. Turn the ignition switch ON.
3. Erase self-diagnosis result for "ABS".
4. Turn the ignition switch OFF.
   NOTE:

   Wait at least 10 seconds after turning ignition switch OFF.

5. Turn the ignition switch ON.
   NOTE:

   Wait at least 10 seconds after turning ignition switch ON.

6. Perform self-diagnosis for "ABS".

Is DTC "C0611" detected?

YES- 

Proceed to DIAGNOSIS PROCEDURE .

NO - 1 

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2 

Confirmation after repair: INSPECTION END