DTC Confirmation Procedure

With CONSULT

1. Turn the ignition switch ON.
2. Turn ignition switch OFF and wait at least 30 seconds.
3. Turn ignition switch ON and wait at least 30 seconds.
4. Perform "All DTC Reading" with CONSULT.
5. Check if the "U111C" is detected as the current malfunction in "Self Diagnostic Result" of "AVM".

Is "U111C" detected as the current malfunction?

YES 

Refer to DIAGNOSIS PROCEDURE .

NO - 1 

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2 

Confirmation after repair: INSPECTION END