DTC Confirmation Procedure
- CHECK DTC PRIORITY
If DTC "U1000" is displayed with DTC "U1223", first perform the confirmation procedure (trouble diagnosis) for DTC "U1223".
Is applicable DTC detected?
YES
Perform diagnosis of applicable DTC. Refer to DTC DESCRIPTION .
NO
GO TO STEP 2 .
- PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 30 seconds.
- Turn ignition switch ON and wait at least 30 seconds or more.
- Select "Self Diagnostic Result" mode of "MULTI AV" using CONSULT.
- Check DTC.
Is DTC "U1000" detected?
YES
Proceed to DIAGNOSIS PROCEDURE .
NO-1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2
Confirmation after repair: INSPECTION END