Work Procedure
- WRITING MODE SELECTION
CONSULT Configuration
Select "Re/programming, Configuration" of "MULTI AV".
When writing saved data
GO TO STEP 2 .
When writing manually
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Select "Configuration" or "After Replace ECU", and write the vehicle specification saved in CONSULT to display control unit.
CAUTION:Do not perform any operation such as the navigation operation during configuration writing.
GO TO STEP 4 .
- WRITE VEHICLE SPECIFICATION
Select "Manual Configuration", and write the setting value as shown in the following table to display control unit according to the vehicle specification.
CAUTION:- Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifications are misread.
- Do not perform any operation such as the navigation operation during configuration writing.
NOTE:- The items shown in this list depend on vehicle specifications.
- The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
- If selection items are not displayed on the CONSULT screen, touch "NEXT".
MANUAL SETTING ITEM Detail Items Setting value STEERING LHD LHD models RHD RHD models NAVIGATION WITH Models with navigation system WITHOUT Models without navigation system ENGINE TYPE GASOLINE Gasoline engine models DIESEL Diesel engine models ENGINE TYPE VQ ENGINE VQ engine models EXCEPT FOR VQ ENGINE Except VQ engine models ENGINE TYPE 3 1.6 LITER 1.6L turbo gasoline engine models 1.8 LITER K9K engine models 2.0 LITER 2.0L turbo gasoline engine models 2.2 LITER 2.2L diesel engine models CAMERA SYSTEM REAR CAMERA Models with rear view monitor system NONE/AVM ph3 Models without camera system AVM (EXCEPT AVM ph3) Models with around view monitor system TRANSMISSION AT/CVT 7DCT models MT M/T models SONAR TYPE NONE Models without sonar system FRONT&REAR Models with sonar system AUDIO AMP TYPE 160W AMP Models without BOSE system 2ch AMP Models with BOSE system DAB FUNCTION Off Models without DAB (digital audio broadcast) function On Models without DAB (digital audio broadcast) function GO TO STEP 5 .
- PERFORM SELF-DIAGNOSIS
Perform self-diagnosis of CONSULT, and check whether or not DTC "U1223" is detected.
Is DTC "U1223" detected?
YES
GO TO STEP 3 .
NO
GO TO STEP 5 .
- OPERATION CHECK
Check that the operation of the display control unit and camera images (fixed guide lines and predictive course lines) are normal.
WORK END