Diagnostic Test

1. Turn the ignition switch OFF.
2. Disconnect power steering solenoid valve harness connector.
3. Check resistance between power steering solenoid valve connector terminals.

   Power steering solenoid valve		Resistance (Approx.)
   Terminal
   1	2	4 - 6 Ω

4. Check power steering solenoid valve by listening for its operation sound while applying battery voltage to power steering solenoid valve connector F45 terminals 1 (positive) and 2 (negative).

Is the inspection result normal?

YES 

INSPECTION END

NO 

Replace gear-sub assembly. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS (2WD models), EXPLODED VIEW WITH TORQUE SPECIFICATIONS (AWD models).