Diagnostic Test

1. Turn ignition switch OFF.
2. Disconnect electric throttle control actuator harness connector.
3. Check resistance between electric throttle control actuator terminals as per the following.

   Electric throttle control actuator		Resistance (Ω)
   Bank	Terminals
   1	1 and 2	Approx. 1 - 15 [at 25°C (77°F) ]
   2	5 and 6

Is the inspection result normal?

YES 

INSPECTION END

NO 

GO TO STEP 2  .

1. Replace malfunctioning electric throttle control actuator. Refer to REMOVAL AND INSTALLATION .
2. Go to SPECIAL REPAIR REQUIREMENT .

INSPECTION END