| BCM |
- Judges each switch status by the combination switch reading function.
- Requests (via CAN communication) the front wiper relay and the front wiper high relay ON to IPDM E/R.
|
| IPDM E/R |
- Controls the integrated relay according to the request (via CAN communication) from BCM.
- Performs the auto stop control of the front wiper.
|
| Combination meter |
Transmits vehicle speed signal to the BCM with CAN communication. |
Combination switch
(Wiper & Washer switch) |
|
| Front and rear washer motor |
- Washer fluid is sprayed according to washer switch states.
- Combination switch operates front washer or rear washer by changing voltage polarity to be supplied to washer pump.
|
| Front wiper motor |
- IPDM E/R controls front wiper operation.
- Front wiper stop position signal is transmitted to IPDM E/R.
|