DTC Related Item (Engine Control System)

DESCRIPTION

When a DTC is detected, ECM executes a mode (in the Fail-safe mode) applicable to the DTC. The fail-safe mode has the preset traveling control mode (accelerator angle variation and engine output limit) and device fix mode.

Fail safe mode		Vehicle behavior
Traveling control mode	Accelerator angle variation control	ECM controls the accelerator pedal depression speed to make it slower than actual speed. This causes a drop in accelerating performance and encourages the driver to repair malfunction. NOTE: ECM does not control the accelerator pedal releasing speed.
Traveling control mode	Engine output control	ECM reduces the engine output, according to the rise in engine speed. This reduces the vehicle speed to encourage the driver to repair malfunction.
Device fix mode		This mode fixes the IVT control solenoid valve and the EVT control solenoid valve in the reference position. The intake manifold runner control valve motor is turned OFF (intake manifold runner control valve opens).

FAIL SAFE PATTERN

Pattern	Fail safe mode
A	Traveling control mode	Accelerator angle variation control
B	Traveling control mode	Engine output control
C	Device fix mode
D	Supercharging stop mode	Supercharger bypass valve control is stopped and becomes the fully open condition.

FAIL SAFE LIST

: Applicable : Not applicable

DTC No.	Detected items	Vehicle behavior
		Pattern				Others
		A	B	C	D	Others
P0011	Intake valve timing control	-	-	*	-	ECM activates the IVT intermediate lock control solenoid valve to bring the cam sprocket into an intermediate lock condition.
P0014 P0078	Exhaust valve timing control	-	-	*	-	-
P0039	Supercharger bypass valve	*	*	*	*	-
P0087 P0088 P0090	Fuel rail pressure control system	*	-	-	-	-
P0101 P0102 P0103	Mass air flow sensor circuit	*	*	*	-	-
P0116 P0117 P0118	Engine coolant temperature sensor	*	*	-	-	-
P0122 P0123 P0222 P0223 P2135	Throttle position sensor	-	-	-	*	The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor.
P0171 P0172	Fuel injection system	*	-	-	-	-
P0190	Fuel rail pressure sensor	*	-	-	-	-
P0197 P0198	Engine oil temperature sensor	-	-	-	-	Exhaust valve timing control does not function.
P0201 P0202 P0203 P0204	Injector	*	-	-	-	-
P0235 P0237 P0238	Supercharger boost sensor	*	*	*	*	-
P0300 P0301 P0302 P0303 P0304	Misfire	*	-	-	-	-
P0335	Crankshaft position sensor	-	-	*	-	-
P0340	Camshaft position sensor	-	-	*	-	-
P0500	Vehicle speed sensor	*	-	-	-	-
P0524	Engine oil pressure	*	-	-	-	ECM illuminates engine oil pressure warning lamp on the combination meter. Engine speed will not rise more than 4, 000RPM due to the fuel cut. Fail-safe is canceled when ignition switch OFF → ON.
P052A P052B	Intake valve timing intermediate lock control	-	-	*	-	-
P0603	ECM	-	-	-	-	-
P0603	ECM	-	*	-	-	ASCD operation may be deactivated.
P0604	ECM	*	-	*	-	ASCD operation may be deactivated.
P0605 P060B	ECM	-	-	-	-	-
P0605 P060B	ECM	*	-	*	-	ASCD operation may be deactivated.
P0606	ECM	-	-	-	-	ASCD operation may be deactivated.
P0606	ECM	*	-	*	-	ASCD operation may be deactivated.
P0607	ECM	-	-	-	-	-
P0607	ECM	-	*	-	-	-
P060A	ECM	*	-	*	-	-
P060A	ECM	*	*	*	-	ASCD operation may be deactivated.
P0643	ECM	*	-	*	-	-
P1033 P1034 P1035 P1044 P1045	Supercharger bypass valve position sensor	*	*	*	*	-
P1078	Exhaust valve timing control position sensor circuit	*	-	*	-	-
P1217	Engine over temperature	*	*	-	-	-
P1805	Brake switch	-	-	-	-	ECM controls the electric throttle control actuator by regulating the throttle opening to a small range. Therefore, acceleration will be poor.
						Vehicle condition	Driving condition
						When engine is idling	Normal
						When accelerating	Poor acceleration
P2004	Intake manifold runner control valve	-	*	*	-	-
P2100 P2103	Throttle control motor relay	-	-	-		ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2101	Electric throttle control function	-	-	-		ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2118	Throttle control motor	-	-	-		ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2119	Electric throttle control actuator	-	*	-		-
P2261	Supercharger bypass valve	*	*	*	-	-