LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX70 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (4 Of 4) >> DTC/Circuit Diagnosis >> DTC P2138: App Sensor >> Component Inspection >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK ACCELERATOR PEDAL POSITION SENSOR

    1. Turn Ignition Switch OFF.
    2. Reconnect all harness connectors disconnected.
    3. Turn Ignition Switch ON.
    4. Check the voltage ECM harness connector terminals as per the following.
      ECM Condition Voltage (V)
      Connector + -
      Terminal Terminal
      M164 97 (APP Sensor 1) 100 Accelerator pedal Fully released 0.45 - 1.0
      Fully depressed 4.2 - 4.8
      98 (APP Sensor 2) 104 Fully released 0.22 - 0.50
      Fully depressed 2.1 - 2.5

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    GO TO STEP 2  .

  2. REPLACE ACCELERATOR PEDAL ASSEMBLY

    1. Replace accelerator pedal assembly.
    2. Go to SPECIAL REPAIR REQUIREMENT .

    INSPECTION END

scientia non olet · About LEMON Manuals