LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Driver Assistance System (Introduction) >> System Description >> Operation >> BSW >> Menu Displayed By Pressing Each Switch >> Display And Warning Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display And Warning Operation

Vehicle condition / Driver's operation Action
Warning systems ON indicator Vehicle speed Turn signal condition Status of vehicle detection within detection area Indication on the Blind Spot Warning/Blind spot Intervention indicator Buzzer
OFF - - - OFF OFF
ON Less than approx. 29 km/h (18 MPH) - - OFF OFF
Approx. 32 km/h (20 MPH) or more - Vehicle is absent OFF OFF
OFF Vehicle is absent ON OFF
ON
(Vehicle detected direction)
Before turn signal operates
Vehicle is detected
Blink
GNSJSOIA0251GB-251Courtesy of NISSAN NORTH AMERICA, INC.
Short continuous beep
GNSJSOIA0252GB-252Courtesy of NISSAN NORTH AMERICA, INC.
Vehicle is detected after turn signal operates Blink
GNSJSOIA0251GB-251Courtesy of NISSAN NORTH AMERICA, INC.
OFF
NOTE:
  • If vehicle speed exceeds approximately 32 km/h (20MPH), BSW function operates until the vehicle speed becomes lower than approximately 29km/h (18MPH).
  • Time shown in the figure is approximate time.
  • Always Blind Spot Intervention system operates together with BSW system. Whenever Blind Spot Intervention system is turned on by pushing the dynamic driver assistance switch, BSW system also be turned on even if the BSW system is turned off. However, at this time the warning systems ON indicator remains OFF.